How to Move a Vending Machine: 10 Mistakes to Avoid
A vending machine looks simple to move until you try it. A full-size snack or drink machine weighs about 600 to 900 pounds, stands over six feet tall and carries most of its weight up high. Most of the damage we see comes from the same few mistakes, and almost all of them happen in the first and last 50 feet, not on the highway. Here are the 10 to avoid.
The 10 Most Common Vending Machine Moving Mistakes
- Laying it on its back. Refrigerated machines must stay upright. Tilting one pushes compressor oil into the cooling lines.
- Plugging it in right away. If the machine was tilted or laid down, let it stand upright at least as long as it was down before powering it on. A full day is safest.
- Skipping the measurements. Measure the machine and every doorway, hallway, turn and elevator at both ends. Most machines need at least a 36-inch doorway.
- Using the wrong dolly. Use a vending or appliance dolly rated well above the machine's weight, with straps. A hand truck from the garage is not enough.
- Moving it alone. Plan on at least two trained people, and three for stairs.
- Leaving product and cash inside. Empty all product, coins, coin tubes and the bill stacker before move day. Extra weight and loose items shift the balance.
- Forgetting loose parts. Tape or remove shelves, spirals and trays, and bag and tag cords and keys.
- Using a pickup truck. A vending machine is too tall and top-heavy to ride safely in a pickup bed. Use a liftgate box truck with E-track so it can be strapped upright.
- Strapping across the glass. Pad the front, and strap the machine at two heights with blankets between the straps and the cabinet.
- No photos before pickup. Photograph every side and the serial plate so you have a condition record.
When to Call a Vending Machine Mover
A short, ground-level move with the right truck and helpers can be a do-it-yourself job. Call a professional when there are stairs or tight turns, when the machine is going to another city or state, when you are moving several machines or a whole route, or when the machine is high value, like a glass-front refrigerated unit, an ATM or a crypto kiosk.
Want the full walkthrough? Read our step-by-step guide to transporting a vending machine.
Download the Free Vending Machine Moving Guide (PDF)
Print it, share it with your team, or keep it on your phone for move day. It has all 10 mistakes, a move-day checklist and what to send us for a quote.
Download How to Move a Vending Machine: Quick Guide (PDF)
Rather have us handle it? Call (866) 216-7742 or get a free quote.
Vending Machine Moving FAQ
- Can I move a vending machine by myself?
- It's not safe. Most machines weigh 600 to 900 pounds and are top-heavy, so plan on at least two trained people and the right dolly.
- How long should I wait to plug in a vending machine after moving it?
- If it stayed upright, you can usually plug it in once it's level and in place. If it was tilted or laid down, wait at least as long as it was on its side; a full day is safest.
- What do you need for a quote?
- Pickup and delivery ZIP codes, domestic or international, the machine type, dimensions and weight, a few photos and your requested pickup date.
Let Us Move Your Vending Machine
We move vending machines, ATMs, crypto kiosks, slot machines, jukeboxes and coin-op laundry nationwide, 24/7. Call (866) 216-7742 or use our online quote form.
Need this moved?
We relocate slot machines, vending machines, jukeboxes, and more — nationwide and internationally. Get a fast, no-obligation quote.
Key takeaways
- Empty all product, coins and cash, and unplug the machine at least 24 hours before pickup so refrigeration and electronics are fully powered down.
- Secure doors, glass and loose parts, and keep the machine upright the whole way. Most machines are not built to carry their weight lying down.
- Measure the machine and every doorway, stairway, hallway and elevator at both ends before booking.
- Ask for blanket or pallet wrap, liftgate service and inside delivery in the quote, so the price matches the job.
Related moving services
USA Vending Machine Movers handles the moves described in this article, locally, across the United States and internationally. See Vending Machine Moving & Transport for how we prepare, wrap, load and deliver each machine, or browse our service areas to find your city. For a quote, call 866-216-7742 or use the quote form with your pickup and delivery ZIP codes.
Planning your own vending machine move
If this article matches a move you are planning, these are the steps that turn it into a booked, on-time delivery. They apply whether the vending machine is going across town, to another state or overseas.
- Gather the basics: the vending machine make and model if you have it, its approximate size, and the pickup and delivery addresses or ZIP codes.
- Note the access at both ends, including steps, stairs, elevators, narrow doors, tight turns, parking and whether there is a loading dock. Photos are the fastest way to share this.
- Request a quote by phone at 866-216-7742 or through the quote form. The quote should list blanket or pallet wrap, liftgate service, inside delivery and any storage.
- Pick a pickup window and a delivery date that work for both sites. If the destination is not ready, ask about storage between the two.
- Prepare the machine the day before. Remove all product and coins, tape the coin door, and secure or remove spirals and shelves that could shift.
- On moving day the crew wraps a snack, drink or combo vending machine, moves it upright with the right dolly, loads it with a liftgate where there is no dock, and straps it in place for the trip.
- At delivery the machine is brought inside, set where it will run, levelled and unwrapped. Let refrigerated machines stand before plugging them back in.
What changes the price
- Distance and route. A local move, a regional move and a cross-country move are priced differently, and flexible dates on a shared lane usually cost less than a dedicated truck.
- Size and weight. The heavier and larger the vending machine, the more crew and equipment it needs.
- Access. Stairs, elevators, long carries and the lack of a dock all add time at pickup or delivery.
- Extra services. Liftgate, inside delivery, crating, storage and after-hours work each add to the quote.
- Timing. A fixed or short-notice date costs more than a flexible pickup window.
Domestic and international options
Within the United States, a vending machine can travel on a dedicated truck for a fixed date, or on a consolidated lane with other freight when timing is flexible. For international moves we crate the machine for ocean or air freight, prepare the commercial paperwork customs requires, and arrange delivery from the port or airport to the final site. You supply the documents only the owner can provide, such as proof of ownership and any permits the destination requires.
How the machine is protected in transit
A vending machine is heavy, top-heavy and easy to scratch, so protection starts before it leaves the building. For local and regional moves it is wrapped in moving blankets and padded at the corners and glass. For freight and long-distance moves it is shrink-wrapped to a pallet, and fragile or international shipments are crated. In the truck it stays upright and is strapped on its own so it cannot tip or rub against other freight. In very hot or cold weather, ask about scheduling and how long the machine will sit in the truck.
After delivery
- Let a refrigerated machine stand upright for several hours before plugging it in, following the manufacturer's guidance, so the refrigerant can settle.
- Once powered, confirm the compressor runs and the cabinet reaches temperature before restocking.
- Reinstall spirals and shelves, then test every selection, the coin mechanism, bill validator and card reader before the machine goes back into service.
If anything looks wrong when the machine is unwrapped, take photos and note it on the delivery paperwork before the crew leaves.
Getting the vending machine ready for pickup
- Empty it. Remove all product, coins, bills and loose parts, and keep the keys with you or tape them to the machine in an envelope.
- Unplug it early. Disconnect power at least 24 hours ahead so refrigerated units can defrost and drain, and wipe up any water.
- Secure what moves. Lock or tape doors, and protect glass fronts and displays so nothing can swing open or crack on the way out.
- Measure the path. Check the width of every doorway, hallway and turn, and note stairs, elevators and the distance to the truck at both sites.
- Clear the way. Move furniture and other equipment out of the route and confirm parking or dock access for the truck.
What is included
A standard quote covers the crew and the truck, blanket wrap or pallet and shrink-wrap depending on the distance, loading and strapping, liftgate unloading when there is no dock, and inside delivery to the spot you choose. Crating, storage and after-hours delivery are added only when the move needs them. To plan a vending machine move, call 866-216-7742 or use the quote form.
Common mistakes when moving a vending machine
- Laying it down. Most machines are built to stand upright. Tipping a vending machine on its back or side can crack glass, shift internal parts and, in refrigerated units, push compressor oil into the cooling lines.
- Skipping the measurements. A machine that fits through the front door may not fit around a tight hallway turn or into a small elevator cab. Measuring both buildings ahead of time avoids a wasted trip.
- Leaving product, coins or keys inside. Loose items add weight, shift in transit and can damage the mechanism. Keys left inside a locked machine can delay delivery.
- Plugging in too soon. Refrigerated machines should settle upright after the trip before they are powered on.
- Booking without describing the access. Stairs, a missing loading dock or a long carry from the truck change the crew and equipment needed. Mention them when you ask for a quote.
Dedicated truck or shared lane?
For a long-distance vending machine move there are two common ways to ship. A dedicated truck carries only your equipment, picks up and delivers on the dates you choose and suits fixed deadlines. A shared or consolidated lane carries your machine alongside other freight going the same direction, which usually costs less but needs a more flexible pickup and delivery window. Tell us your deadline when you request a quote and we will suggest the option that fits.
Scheduling and storage
Give as much notice as you can, especially for long-distance moves, fixed delivery dates or several machines at once. If the new site is not ready when the old one has to be cleared, the vending machine can be picked up, stored upright and wrapped, and delivered once the destination is ready. Ask for storage when you request a quote so it is included in the price and nothing has to be rearranged at the last minute.
Before moving day, confirm who will be on site at each address, the arrival window, and any building rules such as delivery hours, elevator booking or a certificate of insurance. A short call the day before usually prevents most delays.
Questions to ask before you book
- Have you moved this kind of vending machine before, and how will it be wrapped and secured?
- Is the machine kept upright the whole way?
- Does the price include liftgate, inside delivery and placement, or are those extra?
- What happens if the destination is not ready on the delivery date?
- What insurance or valuation coverage applies while the machine is in transit?
Measuring the route for a vending machine
Most moving-day problems start with a measurement nobody took. Before the crew arrives, measure the vending machine's height, width and depth, then follow the path it will take at both ends and measure each point where it could get stuck.
- Every doorway on the route, measured with the door fully open. Hinges and door stops often take away an inch or more.
- Hallway widths and any tight turns, since a tall machine needs room to pivot as well as to pass.
- Stairs: the number of steps, their width, any landings and whether there is a handrail that can be removed.
- Elevators: the door opening, the inside depth and the posted weight limit.
- Low ceilings, light fixtures, sprinkler heads and door closers that a tall machine on a dolly could hit.
Send these numbers with your quote request, along with a few photos of the route. If something is too tight, it is far easier to plan around it, for example by removing a door or booking a freight elevator, than to discover it on the day.
